Checking Saddle Fit: Any Saddle, Any Horse

Ideally, you want 100% of the whole surface of the tree bars in contact with the horse's back so the weight and pressure are evenly distributed over a large surface for maximum comfort, fit and stability on the horse's back.

*If the horse/mule has muscle atrophy behind the withers or a dropped top line you DO NOT want the tree/saddle to fit an unhealthy back or they can never be comfortable or use their body properly.  You want the tree made to fit how the back SHOULD BE!

Once you have the shape of your horses back in the wire (where we explained), you lay the wire in any saddle (where we explained) and check to see exactly how it is fitting your horse. This takes all the guesswork out of saddle fitting, you can see exactly how the whole tree is fitting. This will work with any type of saddle English or Western on any horse or mule! Armed with your wire and your paper with the tracings of the horses back you can go to any saddle in say a tack shop, turn it over and see what kind of contact/fit you would have. You can take your horse with you to go saddle shopping!

**We can’t stress enough the first thing you MUST look for when taking the shape of your horses back is to decide if the shape is HEALTHY?? The majority of horses we see have some degree of muscle atrophy/dished in withers and their top line is dropped from being ridden with saddles that the angle of the tree bars is too narrow and possibly the saddle is too long or the rocker shaped is incorrect.

When a saddle is pinching a horse in the withers the horse will tend to hollow his back/drop his top line, bring in the shoulders, short step, hold head up higher and not want to use their hindquarters to get away from the pain.  Setting them up for bad confirmation and unable to use their body comfortably and correctly.  Ill-fitting saddles will DEFORM a horse’s back to the shape of the saddle they are forced to wear!  Many people think dipped in/distinct withers is a sign of “good/high withers” or there is some “Thoroughbred” in them and that “they will hold a saddle well” where in fact the majority of the time they have a damaged UNHEALTHY back!

You DO NOT want a saddle to fit to the shape of a DAMAGED back or they will never have a chance at a healthy back.

If you realize there is a problem, shape the wire to what the withers and rocker SHOULD BE shaped like not how the horse is and then evaluate the saddle to see if there is enough room for their shoulders to fill out and their top line to come back up. At first the saddle may be too wide and the rocker angle too straight but you can correct that with using our REMUDA SADDLE FITTING PAD and put shims to fill in until their back recovers if they are able to or permanently if necessary.

Checking The Wither Angle/Shape

it helps to have someone hold the skirts down out of the way, then just lay the wire in the saddle 3” back from the end of the tree bars which is the same place as on the horse (3” back from the shoulder blade). Don’t push down on the wire just lay it in and compare the horse (wire) & the saddle tree bar angle.

Improper Wither Angle/Shape

This is what we see with 90% of the western saddles made today! The angle of the tree bars is too narrow! All the pressure is put in only about 40% of the bars, near the backbone there is no contact.

Many saddle makers in an attempt to correct this have made the gullet width wider but leaving the angle the same which just puts the pressure point lower down on the withers, causes the saddle to want to sit “down hill”and then you also can have a problem with not having enough clearence/gullet height hitting the wither on some horses.

Depending on how deep that gap is our remuda saddle fitting pad can correct or at the least improve the fit to a point. In this situation, you would put inserts in the middle and back NOT the front pockets.

Proper Wither Angle/Shape

As you can see the horse (wire) shape/angle is the same as the saddle tree bar angle where you have 100% percent contact! The shoulder blade can rotate under the bars. The horse will want to take longer strides, want to round their back and collect without pain or restriction!

Checking the Rocker

Just lay the wire in the center of the tree bar, which equals the 4 1/2” down from the spine on the horse, with the tip of the wire at the end of the saddle tree bar in the front, which equals right behind the shoulder blade on the horse. Then compare your shapes.

Improper Rocker Angle/Shape:
Here the horse has more dip/curve to his back than the saddle bars. We see this often also due to horses dipping/dropping their top line in an attempt to get away from the pain of an ill fitting saddle. This can be corrected up to a point with our remuda saddle fitting pad. In this case if it is the only problem you would put shims in the middle only the same thickness as your gap.

Proper Rocker Angle/Shape

Here the horse’s back shape and the tree’s shape are the same giving 100% contact, no pressure points!

Proper Saddle Placement

Proper saddle placement in the front for riding and to check the maximum saddle length a horse can handle: You want the front of the tree bar right behind the shoulder blade for the rest of the saddle tree bars shape to fit a horse correctly. It is fine for the leather of the saddle to go beyond this point in the front.

Saddle Length

This saddle is 24” long. With any saddle on your horse in the correct forward position with the saddle tree bars right behind the shoulder blade as shown above....measure straight across from the front of the tree bar to the longest point of the leather in the back running the tape at about the base of the cantle to the base of the fork. This is how you determine the overall length of a saddle.
*To determine the maximum length a saddle can be for a horse measure the same way with a saddle on in the proper position but run the tape from the front of the tree bar to the center of the cowlick.

Nothing including the leather in the back should go past the center of the “cowlick” (at the flank where the hair goes in the opposite direction). If the leather does go past this point the saddle starts riding up on the hip/hind quarters, is too long, will interfere with the hindquarters, will tend to “bridge” where most the of the pressure will be in the front and the back not in the middle which will cause pain from pressure points and rubbing the top of the hindquarters. Interfering with hind quarters besides being painful will inhibit things like proper propulsion, turning and stopping. Bob likes to say it is driving with your brakes on or running with your pants down......you can do it but it isn’t easy!

Here you can see using the tape as a line only there are several inches before the saddle touches the “cowlick”. If the only saddle you can measure is too long tell us how many inches past the cowlick the saddle goes.

Rigging Position

This picture is showing an example of the rigging position being too far back, the saddle will tend to want to work its way too far forward. We find the 7/8 rigged position to be the most universal.

**Horses of all breeds in general have gotten wider, flatter and shorter in their back shape over the last few decades! The majority of horse owners and the saddle making industry including custom makers have not realized this change. We are also finding there are so many damaged backs now the industry see these unhealthy shapes as “normal” and continuing to build saddle trees to that shape which is encouraging the problem to continue and get worse.

See also our Saddling Fitting Information/Philosophy page!!

We hope this information will be helpful to you and your horses/mules! If you have any questions please give us a call. It is our passion and goal to help as many horses as possible to become pain free from saddle fit! They are a gift in our lives and deserve the best and to be comfortable!!